Re: VCNI NETWORK ON VLCOUD DIRECTOR 5.1
Hi,I know that I associate the pool under the network pool tab in the Org properties,I want to know if the IP in the VDC ORG must be the same of the Vlan created in the Switch (in my case 10.0.30.0...
View ArticleRe: VCNI NETWORK ON VLCOUD DIRECTOR 5.1
If VLAN 30 is used for your VCDNI network pool, it should have no IP subnet and should be used for nothing else except the VCDNI network pool. Should not be used for an external network or any other...
View ArticleRe: VCNI NETWORK ON VLCOUD DIRECTOR 5.1
Hi,ok but when I create every new network (org net or vapp net) Vcloud ask me for a subnet and for IP Pool...
View ArticleRe: VCNI NETWORK ON VLCOUD DIRECTOR 5.1
yes, because the isolated network will have an edge acting as the gateway for that network. in a sense, whatever is in the isolated network can be completely made up, as log as the network/ip/mask...
View ArticleRe: VCNI NETWORK ON VLCOUD DIRECTOR 5.1
Ok but If I will create let's say the subnet 192.168.5.0 /24 in the VDC network the Pool reduce by 1 the total nets available and assign the Vlan 30 in the Portgroup how can communicate between the...
View ArticlevCloud 5.5 Cell Self-Service page blank
Hello, I'm demoing the 5.5 Appliance. I have my cell and everything fully configured but when I go to https://url/org/company name The page loads but there is nothing on it, it's blank. Any idea what...
View ArticleRe: vCloud 5.5 Cell Self-Service page blank
Stupid Documentation. The Systems Settings > Public Addresses was set wrong. I had it set to https://fqdn/ It should have been https://fqdn/cloud/ After properly putting it in the self-service...
View ArticleRe: Help with "VMRC plugin is missing" - IE Specific
Hi Rich I don't know if this will help you but I ran into a very similar issue with vmware remote console version 4.0. For some reason it was looking under the Firefox folder for the plugin even...
View ArticlevCloud Director 5.5 fail to change NAT from automatic to manual
In our cloud environment, below is the version of each component vCenter 5.5.1vCloud Director 5.5.1vCloud Networking and Security 5.5.0a One vApp with one VM is created in Org VDC. Two vApp network is...
View ArticleCPU and RAM limits for vCloud tempaltes
Hi, i have virtual machines in my vCloud environment that are used as templates.those vm's had CPU and RAM limits. i have removed those limits but when i use them to deploy new vm's to the cloud the...
View ArticleRe: CPU and RAM limits for vCloud tempaltes
When you say CPU and RAM limits, do you mean like in Edit Settings of the VM from vCenter? If so, any time you deploy a new copy of the VM it will have those value reset. (Deploy is when a VM is...
View ArticleRe: vCloud Director 5.5 fail to change NAT from automatic to manual
I think in the case of Manual Mode, you can't use addresses which are assigned elsewhere. e.g. you have an IP Pool for the external that is 3 addresses, so those can be programatically used else where...
View ArticleRe: CPU and RAM limits for vCloud tempaltes
i don't want any limits on my virtual machines. Is it possible to remove the limit on the template and keep the deployed virtual machines unlimited as well?
View ArticleRe: CPU and RAM limits for vCloud tempaltes
once you modify them, just don't stop/start the VMs from the vCloud Director interface. otherwise the changes will be undone. this is normal operation for vCloud Director ... in that it will set a...
View ArticleRe: CPU and RAM limits for vCloud tempaltes
what do you mean by don't stop/start the VMs from the vCloud Director interface?don't reboot the virtual machine? it's not possible. i'm using version 5.5.0.1323688. screenshot at...
View ArticleRe: CPU and RAM limits for vCloud tempaltes
ok, so you are in a reservation pool. If you have reservations configured in the vCloud Director GUI, it'll put those on the VM every time it's power cycled via the GUI.
View ArticleRe: vCloud Director 5.5 fail to change NAT from automatic to manual
In case of manual mode, configured external IPs are never used for any vApp, so it is not related to duplicated external IPs.I really want to configure manual NAT mode because I need configure NAT...
View ArticleRe: CPU and RAM limits for vCloud tempaltes
i don't see this problems in all of my catalog, only on some. if the template never had any limitations , there is not limitation on deployed VMs.i happens only on VMs there were created by a template...
View ArticleRe: vCloud Director 5.5 fail to change NAT from automatic to manual
No IamTHEvilONE wrote: I think in the case of Manual Mode, you can't use addresses which are assigned elsewhere. e.g. you have an IP Pool for the external that is 3 addresses, so those can be...
View ArticleRe: vCloud Director 5.5 fail to change NAT from automatic to manual
The error shown in your screenshot is because you have /28remove everything except the IP address
View Article