Re: Storage Policy in vCD
Thanks, I had start the vSphere Profile-Driven Storage Service on the vCenter Server. Not sure why it was off.. it is set to auto start.
View ArticleRe: fenced networking static routing
I just made a test and another VM in the org could reach this fenced vApp via the external IP. So that is good stuff. The org network would be routed with no NAT. Obviously the VMs in my test org does...
View ArticleRe: Python SDK for vCloud Director
Have you ever tried https://pypi.python.org/pypi/vcloudtools ?
View ArticleVCloud 1.5 to 5.5 Database Upgrade Error
Trying to upgrade from vcloud 1.5 to 5.5 but when upgrading the database i get this error "Incorrect database version. Upgrade from version "1.5.1" is not supported." How can i resolve this..
View ArticleRe: VCloud 1.5 to 5.5 Database Upgrade Error
you can't go directly from 1.5.x to 5.5.x generation. you have to upgrade to 5.1.x first, then to 5.5.x.
View ArticleRe: Error when removing static IP pool from vcloud external network
Check this link . I've had the same problem and it was solved after i've deleted the IP from de Vcloud DB...
View ArticleRe: fenced networking static routing
So you are in a double NAT scenario. NAT at the vApp level, and a routed network means a NAT at the Organization level. The fenced vApp will not inherit rules because the external IP for the VM itself...
View ArticleRe: fenced networking static routing
I only want to have NAT at the vApp The org edge gateway should not provide any NATing. I will set static routes in the core routers pointing to this edge gateway for the assigned subnet. I could just...
View ArticleRe: fenced networking static routing
I'm just wondering why things are getting overly complicated. Yes, a static route could do it as well to hit the Gateway Edge at the Org level, then pass it down to the NAT. But that same Gateway...
View ArticleRe: VCloud 1.5 to 5.5 Database Upgrade Error
If I have already upgraded to vcloud director 5.5 and cannot upgrade the database can i still downgrade vcd without any problems
View ArticleRe: fenced networking static routing
Thanks! We use vcd for software testing. In our WIndows templates the firewall is turned off, therefore it makes sense to use the firewall in the vapp edge. But I might consider to go with this off!
View ArticlePort 50,000 - 50,200 Blocked?
Within an organization I have setup static routing between 3 vApp networks within 3 different vApps to be able to communicate with each other. I have disabled the firewall on the Edge gateway (org...
View ArticleRe: Port 50,000 - 50,200 Blocked?
have you tried doing something like this to check the actual running config in the Edge? http://blogs.vmware.com/vsphere/2013/01/monitoring-and-troubleshooting-using-edge-gateway-clis.html you can also...
View ArticleRe: VCloud 1.5 to 5.5 Database Upgrade Error
The DB upgrade probably never happened. You have a cell with the 5.5. bits on it, but the DB upgrade script should not have changed anything given the incompatible error. Ideally, one would have taken...
View ArticlevCloud networking. No connection between VM.
Some networking issues, while learning vCloud. Have two VM (Win7) on a vApp network named LabNet. No ORG VDC network are existing. The machines are both on the same vApp network (LabNet), and I have...
View ArticleRe: vCloud networking. No connection between VM.
I did this: VMware KB: Virtual machines lose network connectivity in a vCDNI network pool No difference and no connectivity between vm1 and vm2. I run the lab it in a nested environment. Esxi 5.5...
View ArticleCant seem to get VCDNI network isolation VM's to communicate with edge gateway
All,I am running VCD 5.5 and deployed VCDNI network pools. I have configured the edge gateway to have firewall disabled, enabled DHCP, configured sub-ip allocations to allow the edge device access in...
View ArticleDefault settings of a Allocation model
Is it possible to change the default settings for a Allocation model? So, for example, when I create a new 'Pay-as-you-go' Customer VDC the 'Maximium number of VMs' is default set to 50 instead of 100
View ArticleHow to Configure IPv6 Network in vCloud Director 5.1?
Hello, I have been searching for clear documents on how to configure the Network Properties so that my isolated vApp can use IPv6. Per my attached image, you can see that I have the following inserted...
View ArticleRe: How to Configure IPv6 Network in vCloud Director 5.1?
The quick answer is VCD does not support IPv6; that said it really only has issue (when talking about vApp networks) at the configuration side of the application. If you want to use IPv6 set the...
View Article