Re: The description of the GatewayNatRuleType is not returned
You can use the vmware website to file an SR, or call vmware support and file SR over the phone
View ArticleRe: DHCP and routed network vapp
That's absolutely not true Eric Lee wrote: Your setup looks a lot like ours. I believe if you uncheck both firewall and nat on the internal vApp network than the vApp would not be connected to the VSE...
View ArticleRe: DHCP and routed network vapp
Makes sense that it's not true as then you could have some VM's internally using this network setup and have no access outside the vApp (such as app and DB VM's) and then a multi-honed web VM to this...
View ArticleRe: How to backup the vms in vCloud
I'd like to offer backups to clients VM's in vCloud director. Currently the way I'm doing it is presenting iSCSI lun directly to the VM's and using that disk to use programs like backup assist. Can...
View ArticleRe: problems with new install of vCloud Director 5.1
Note: Discussion successfully moved from VMware vCloud™ API to VMware vCloud Director
View ArticleHow to check if entity is in "Busy" state
Hi, I am trying to add a new vm to a vApp, using recomposevApp. At the same time several other threads also try to recompose and add a vm to the same vApp. And then I delete the vApp from which the vm...
View ArticleRe: How to check if entity is in "Busy" state
recomposeVApp operation shoudl return you TaskType. In TaskType there is a field call 'status', which has one of following values: The execution status of the task. One of:queued (The task has been...
View ArticleRe: VXLAN cluster preparation issue
Hi 12074n12, I have documented this problem & its resolution in a blog post available at: Configuring VXLANs: vCNS 5.1.1 create dvPort Groups, but fails to create vmknic interfaces Hope this help:...
View ArticleRe: DHCP and routed network vapp
Hi, Did you enable DHCP on the internal network using the DHCP settings on the internal network, becausein this case you have two DHCP servers, and the VM got a lease from the internal DHCP server and...
View ArticleRe: problems with new install of vCloud Director 5.1
shouldnt there be 3 ip addresses 1 for the portal (this is the one that responds to https://<ip address>/cloud, 1 for the console this allows console sessions to go through, and management. i...
View ArticleRe: DHCP and routed network vapp
Hi, I magaged to make the netwokring work (without the DHCP) VM: (manually set)IP = 192.168.0.222GW = 192.168.0.254NM= 255.255.255.0 vapp nework:-enable NAT-create a mapping from VM NIC to...
View ArticleRe: How to check if entity is in "Busy" state
You can check whether a vApp is busy in two ways: 1) get the vApp, observe the <Tasks> element inside the vApp and check for any tasks in 'running' state: if there's a running task then the vApp...
View ArticleRe: Promiscuous Mode network with vCloud
We have managed to do this using an orchestrator workflow. The workflow executes a script that looks for dvPortgroups with "PROMISC" in the name, when found it enables promiscuous mode on that...
View ArticleHowto query the DHCP lease configuration
Hi Is it possible to query the DHCP lease settings of an edge gateway using the vCloud API? If I log into the edge gateway in the vcenter and execute the show service dhcp commandI get the desired...
View ArticleRe: VCD 1.5.1.622844 - "Insufficient Resources" when power on a vse
Hi All. This issue has been resolved or at least we are now able to create "routed" networks without the error mentioned. The problem was licensing. The VShield license that was loaded on the VCenter...
View ArticleRe: problems with new install of vCloud Director 5.1
The eval of it comes in an OVA. When installing it, there are only options for 2 IPs, And once it is running, you can only modify two IPs. There's no CLI for it (not a Red Hat one, at least), so no...
View ArticleRe: Howto query the DHCP lease configuration
Hi, maybe you can get the information from the vcloud:vm. Some Code to get the IP (vCO-Javascript): var networkConnections = vm.getNetworkConnectionSection().networkConnection.enumerate(); for each...
View ArticleRe: Howto query the DHCP lease configuration
This isn't supported thelittlemouse wrote: Hi Is it possible to query the DHCP lease settings of an edge gateway using the vCloud API?
View ArticleRe: Unable to customize guest opetrating system windows xp
Hi, I have tried "C:\Program Files\VMware\VMware Tools\vmtoolsd.exe" --cmd "info-get guestinfo.ovfEnv" from command line, It has succeed. And also I have tried recustomize guest after giving some time...
View Article